Showing posts with label Hardware store. Show all posts
Showing posts with label Hardware store. Show all posts

How high is too high?

So, I got home from work yesterday, and painted the bathroom....

What?

Yeah.  You might have seen the unpainted corner in previous pictures.  I left it unpainted, because that's where the shower stall is going. 

Apparently, one needs to prime before attaching the wall panels.  Who knew? 

And yes, it would have been so much easier to prime that area when I was priming the rest of the bathroom (grumble, grumble grumble).  So let this be a lesson to you - always prime behind your shower :)

 
 Look!  Primed walls!! (grumble, grumble grumble)

And I had one of those special moments in the hardware store yesterday...

I needed to buy adhesive to attach the shower panels to the wall.  My first mistake was asking for help, instead of trying to find it myself.  I told the dude I was installing a shower stall, and needed adhesive for the wall panels.

"You mean a tub surround"

No, there is no tub.  It's just a shower stall, 2 walls plus a corner.

"So, a tub surround"

  Sure, let's go with that.

"How much do you need?"

Well, it's just two walls and a corner...

(With a very concerned look on his face, and in a very soft tone of voice) "Most tub surrounds are three walls..."

I'll take two, and return the second if I don't need it.

Back at the house... fixtures!  Mind you, they aren't actually hooked up yet, but still!!!




 There is that "bad" part of the flooring - the last area I tiled, where they didn't match up exactly right.  I'm glad it's behind the toilet, and really isn't that obvious :)


 And note about the bead-board.  Most "experts" say the panelling should be 1/3 or 2/3 the height of the wall, and never half.  The upstairs room are all around 93", so 1/3 would be around 31", 2/3 around 62", and 1/2 around 46".  I think 2/3 is too high, but 1/3 wouldn't work at all - I wanted the bead-board to be higher than the sink...


... but didn't want the outlet (and light switch on the other wall) to get in the way.  So, it had to be higher than the sink, and higher than the outlets... which put it right to the centre seam of the drywall.  If it was higher than that seam, then I wouldn't have to do that seam...



So, I had Dad cut the panels in half (to 4'), and mounted them at 50.5" high (the baseboard will hide the gap at the bottom).  Once the trim at the top is on, the entire height should be around 52" - not 1/3, not 1/2, not 2/3, but a height that works for the room, and for me :)

Why I put my cart before the horse.

One of my major headaches with this reno (and with life in general) is that I have a picture in my head of what I want the end result to be, but I have a hard, if not impossible, time trying to make that picture a reality.


Like trying to get the bathroom floor tile - I knew what I wanted, knew it existed, and even knew it was still being manufactured, but had a horrible time trying to find a place that sold it.

So, I tend to buy things before I need them, since I know from past experience that if I wait, the item will be gone, out of stock, discontinued, etc.

And all of the above is the justification for why I have already bought my kitchen tap (okay, there was no worry it would be discontinued, but it was on sale!).  And why I had the lights and towel bars, etc. for the upstairs bath ages before the room was even roughed-in.

And why I've already found the lights I want for the kitchen and dining rooms :)




Which, of course, is a whole other story...

I had a picture in my head of what I wanted - ribbed glass, with a silver-coloured metal - any silver-coloured metal finish would do.

The main issue was that I needed a suite of lights to go in all the areas I want - a large one over the table, a couple of pendants over the peninsula, and something to go over the sink (I also have pot lights (already bought, of course) for the area for over-all lighting).

Looking at the web sites for the big box stores, I found that, while they have lights I like, they either don't have the entire range, or don't have it on their sites.  And I'm not driving 30+ minutes each way to find out if I can get the styles I need.

So, I decide to look at independent lighting stores (oddity: while I won't drive 30 minutes to a big box store, I have no issues with driving longer than that to an independent retailer.  Hrmm.)

St. Catharines is the largest city in this area, and tends to have the most options for items like this, so I make a list of the 4 stores in the area (complete with Google maps), grab Mom, and drive on over. 

We go to the first store - small selection, some interesting things, and PRICEY!  Mom and I are the only ones in the store.  There is a guy behind the counter.  Doesn't say hi, doesn't ask if we need help... nothing.  At one point, he walked out from behind the counter and approached us... just to walk on by.

0 for 1.

Second store has gone out of business.

0 for 2.

Third store is HUGE.  Tons of lights, but no organizational theme that I can determine.  So, trying to look for kitchen lighting means walking through the entire place, picking out appropriate fixtures from all the others.  But hey!  I find something similar to what I want, but there is only one style.  Again, there are clerks walking around, but no offers to help.  I finally trap one at the counter, and explain what I'm looking for and make sure to say that, while I want a silver-coloured finish, it doesn't matter if it's chrome or brushed pewter or whatever.  I take the clerk over to the one I found, intending to ask if there are matching fixtures I can order.  The clerk looks at it, looks at me, and says "But that's a pewter finish, not chrome".

0 for 3.

Go to the fourth store, expecting the same trend to continue.  We go in, I can't find anything like what I'm looking for.  But wait.... a clerk actually approaches, and asks if he can help!  I explain what I want, he says they have none in stock, but that we can look through all of their catalogues, and they can order in anything I find.  He pulls out a bunch of catalogues, flips right to what I want in each of them, discusses different styles, etc. and gives me a photocopy of the ones I've chosen, complete with prices and his card.

Guess where I'm getting my lights from?


Now keep in mind, these stores exist to sell lighting.  They may have other decorative objects, but they are, first and foremost, lighting stores.

Their main competition is the big-box stores.  They cannot hope to compete in certain areas with the big-boxes, but they can out-do them in service and selection.  In this decidedly un-scientific sample, though, two out of three failed, and worse than any big-box store I've ever been in.

And this isn't the first time I've had experiences like this:  basically, I'm standing there, with my money in my hand, and the retailer is making it hard for me to buy from them.

I'm not asking for discounts.

I'm not asking for special treatment.

I'm asking to buy what they are selling, and they create obstacles*. 

This is one reason independent retailers, in my opinion, fail.  I don't expect the clerk in Home Despot to be able to answer my questions on lighting placement.  I DO expect their counterpart in an independent lighting retailer to able able and willing to.


_____________________________________________________
* I have story after story after story about this:  like the shoe store clerk who told me if I wanted to find out if the other store in their two-store chain had the boots I was looking for in my size, I should call them myself (keep in mind, the other store was a 2 hour drive away).  I walked down the street to their competitors and bought boots there.

My favourite, though, was when I tried to buy my car - off the lot, no ordering, no financing.  The first dealership I tried told me it was a lot of work to figure out the price, and that they'd get back to me.  Six years on, I'm still waiting for that call...

How many hole saws does one person need?

After my fun with replacing the front door lock, I decided to wait until the next day to do the back door lock. That lock was a bit more challenging, as a new hole had to be cut for the deadbolt, and the corresponding bit chiseled out of the door jamb. Again, Dad said something about the attic, and disappeared.

I started with the handle part, and that went well. By that time, Dad's curiosity got the better of him (or he was tired of hearing me whine), and he agreed to drill out the section for the deadbolt in the door and the jamb. To drill out the jamb part, a 1" spade bit is required. Of course, I have a 1/8, 1/4, 1/2 and 3/4. No 1". Off to the hardware store - thankfully, it's near by. While I was gone, Dad decides to start on the hole in the door. And we both have a hole saw attachment for the drill of the correct size - woohoo! Except, it's for wood. And the door is metal clad.

I come home from the hardware store to the smell of burnt wood. Using a wood drill bit on metal produces a lot of heat, apparently. And the inside of the door is wood. Dad looked at me and said nothing actually was set on fire...

Okay, the first hole saw cut through one side of the door, and through the center. But we still have to drill through the second metal sheet. And the first hole saw is dead. The teeth are completely worn down. So, let's use the second hole saw. And we proceed to wear the teeth down on that as well. Okay. Did I mention I'm really glad the hardware store is really close?

Home with the new $26.00 hole saw, and 2.533 seconds later, the hole is complete. And the new deadbolt covers all the scorch marks.

Moral of the story? ALWAYS use the right tool for the job. And make sure Dad knows were the fire extinguisher is kept.


.

LinkWithin

Related Posts Plugin for WordPress, Blogger...